Product list corresponding to Magnetic material

Magnetic material products were found in the search.|Bunri is a specialized manufacturer of equipment that separates and discharges sludge and chips from grinding and cutting

13 products were found in the search.

Magnetic separator Phoenix

Magnetic separator Phoenix

Magnetic separator using rare earths, which has about 10 times the magnetic energy* of ferrite.
A lineup of four models is provided to suit your requirements.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Grinding
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Saving machine Honing machine Super finishing machine (Super finisher) Thread rolling machine Induction hardening machine Washing machine

Show Detail

Drastic cleaning reduction for grinding coolant system

Drastic cleaning reduction for grinding coolant system SLG

Grinding system equipped with the magnetic separator and cyclone filter mounted on the uniquely designed tank.
Optimum for grinding sludge processing of magnetic materials.

Coolant Water soluble
Category Magnetic material
Processing details Grinding
Work material FC/FCD Steel
Chip shape Sandy Cottony
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine

Show Detail

Drastic cleaning reduction for grinding coolant system COMPACT

Drastic cleaning reduction for grinding coolant system COMPACT CPT

Grinding system with the cyclone filter mounted on the uniquely designed tank.
Optimum for grinding sludge processing of non -magnetic materials.

Coolant Water soluble
Category Magnetic material Non-magnetic material
Processing details Grinding
Work material FC/FCD Steel Aluminum Stainless Copper Titanium Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine

Show Detail

Ultra-precision filtration coolant system

Ultra-precision filtration coolant system SB Filter YA

Ultra-precision filtration system that uses steel balls as the filter medium.
The filter media is automatically cleaned by performing operations on the touch panel.
Optimum for grinding sludge processing on honing machines and super-finishing machines.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Grinding
Work material FC/FCD Steel
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm)
Machine tool Honing machine Super finishing machine (Super finisher)

Show Detail

Magnetic drum conveyor

Powerful magnetic drum conveyor MMS
Super strong magnetic drum conveyor M10
Powerful magnetic drum conveyor HMS
#30 Super strong magnetic drum conveyor M10

Microfiltration conveyor equipped with powerful magnetic drum.
Optimum for cutting chip processing of castings and iron.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less)
Machine tool Machining center #30 Machining center Broaching machine Gear cutting machine Gun drill machine Cutting specialized machine Washing machine

Show Detail

Magnetic roller conveyor

Powerful magnetic roller conveyor RCC
Magnetic roller conveyor RC

Roller conveyor to perform filtration and chip transport using the magnetic drum.
A wide range of processing is possible; from long chips of about 100 mm to fine chips.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Sandy Cottony Granular Needle-shaped Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Broaching machine Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

Magnetic screw conveyor

Powerful magnetic screw conveyor SCC
Magnetic screw conveyor SC
Powerful vertical magnetic screw conveyor VS

Screw t ype conveyor using magnet.
The rotating part is not exposed, so this can be used safely and se curely.
Optimum for cutting chip processing of gear cut ting machines, broach machines, etc.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Granular Small curl-shaped (50 mm or less)
Machine tool Machining center Broaching machine Gear cutting machine

Show Detail

Magnetic belt conveyor

Magnetic belt conveyor MB

Conveyor that conveys the tangled chips of magnetic material using the belt while adsorbing them with the magnet.
Optimum for processing tangled dumpling-shaped or curl-shaped chips.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Cutting
Work material FC/FCD Steel
Chip shape Long curl-shaped (101 mm or more) Dumpling-shaped
Machine tool Machining center NC lathes Automation machine Cutting specialized machine

Show Detail

Rolling filter conveyor

Rolling filter conveyor MAL

Conveyor that supports both magnetic and non-magnetic materials with a combination of magnet and punching filter.
Optimum for those who process both magnetic and non-magnetic materials using a single machine tool.

Coolant Water soluble Oil-based
Category Magnetic material Non-magnetic material
Processing details Cutting
Work material Mixed chips (aluminum + FC or sintered metal)
Chip shape Granular Small curl-shaped (50 mm or less) Small curl-shaped (51 mm to 100 mm)
Machine tool Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Cutting specialized machine

Show Detail

Cyclone filter APOLLO

Cyclone filter APOLLO AP

Cyclone-type secondary processing unit that you can use extensively regardless of magnetic or non-magnetic materials.
Compatible with fine cutting chips and grinding sludge.
The defoaming mechanism supplies the non-foaming clean liquid.

Coolant Water soluble Oil-based
Category Magnetic material Non-magnetic material
Processing details Grinding Cutting
Work material FC/FCD Steel Aluminum Stainless Copper Titanium Carbide Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Machining center NC lathes Induction hardening machine Cutting specialized machine Washing machine

Show Detail

Bunri filter

Bunri filter RBF

Bag-filter-type filtration unit with a simple structure and high-precision filtration.
Optimum as a secondary filtration filter for cutting and grinding.

Coolant Water soluble Oil-based
Category Magnetic material Non-magnetic material
Processing details Grinding Cutting
Work material FC/FCD Steel Aluminum Stainless Copper Titanium Carbide Magnesium Mixed chips (aluminum + FC or sintered metal)
Chip shape Sandy Cottony Granular Needle-shaped
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Saving machine Honing machine Super finishing machine (Super finisher) Thread rolling machine Machining center Broaching machine NC lathes Automation machine Gear cutting machine Gun drill machine Induction hardening machine Cutting specialized machine Washing machine

Show Detail

Magnetic filter

Magnetic filter MF

Line filter that uses a magnet as a filter medium to capture cutting chips and grinding sludge of magnetic materials.
The filter medium is a magnet, so there are no consumables and parts replacement is not required.

Coolant Water soluble Oil-based
Category Magnetic material
Processing details Grinding Cutting
Work material FC/FCD Steel Carbide
Chip shape Sandy Cottony Granular Needle-shaped
Grinding chip size Ultrafine particles (5 μm to 10 μm) Fine particles (10 μm to 100 μm) Coarse particles (0.1 mm to 0.5 mm)
Machine tool Grinding machine Tool grinding machine Saving machine Honing machine Super finishing machine (Super finisher) Thread rolling machine Machining center NC lathes Automation machine Gear cutting machine Gun drill machine Induction hardening machine Cutting specialized machine Washing machine

Show Detail